- 48
- 250 432
douglas pryor
Приєднався 14 лис 2011
www.douglaspryor.com
DouglasAPryor/
DouglasAPryor/
Forging and Chasing a Steel Face (full length)
This video was not possible with out the incredible people on Patreon.com/douglaspryor and their generous support! I means so much to be able to put together and share these educational resources and it literally wouldn't happen with out your support! Thank you!
5 years ago I tried sharing how I make one of these 12ga steel faces, I did it with a pretty basic slide show. Its only 7 minutes long and does describe the process:
ua-cam.com/video/toI1grsVwU0/v-deo.html
I always wished I had filmed more of the raising process as it's one of the most important steps.
It relies on mixing hot work over shaping stakes, slow anneals, and cold work working from both sides of the sheet.
So when I had the chance to make a new version of this steel face style I made sure to film as much as the process as I thought was reasonable.
If you follow me on IG then this project might look familiar but those tiny snips and clips won't give the keen observer nearly enough information.
So here is the full length version, I did cut it down to under an hour while leaving in as much as I could to show the full process.
5 years ago I tried sharing how I make one of these 12ga steel faces, I did it with a pretty basic slide show. Its only 7 minutes long and does describe the process:
ua-cam.com/video/toI1grsVwU0/v-deo.html
I always wished I had filmed more of the raising process as it's one of the most important steps.
It relies on mixing hot work over shaping stakes, slow anneals, and cold work working from both sides of the sheet.
So when I had the chance to make a new version of this steel face style I made sure to film as much as the process as I thought was reasonable.
If you follow me on IG then this project might look familiar but those tiny snips and clips won't give the keen observer nearly enough information.
So here is the full length version, I did cut it down to under an hour while leaving in as much as I could to show the full process.
Переглядів: 49 373
Відео
Bat Mask full length cut Part 1: Raising and forming stakes.
Переглядів 1,2 тис.5 місяців тому
If you want to train with me in person here is my growing workshop schedule: douglaspryor.com/workshops If you cannot work with me in person then my best online educational resources are on Patreon. Detailed follow along projects and tool resources are available here: www.patreon.com/douglaspryor This video is for all the gluttons for punishment that want no shortcuts or missed steps. So these ...
High relief Technique: Crashing the wave.
Переглядів 1,4 тис.Рік тому
Here is a piece I really enjoyed making. Trying to capture those leathery wrinkled bat wings took a few tries to accomplish. You can see the finished piece here: pCNFw6KtDa_j/ This video is an example of the things I make for Patreon. It was not possible with out the incredible people on Patreon.com/douglaspryor and their generous support! I means so much to be able to put togeth...
Thistle Spikes Demo Technique.
Переглядів 2,1 тис.Рік тому
This video was not possible with out the incredible people on Patreon.com/douglaspryor and their generous support! I means so much to be able to put together and share these educational resources and it literally wouldn't happen with out your support! Thank you!
Tips for Chasing Stainless Steel
Переглядів 1,1 тис.Рік тому
Thank you to my Patreon community for making video's like these possible! Your support means the world to me! Thank you! Workshop updates and contact information: DouglasPryor.com Patreon.com/DouglasPryor douglas_pryor
Meet the Makers: John Williams and Douglas Pryor.
Переглядів 8012 роки тому
Check out the set: ua-cam.com/video/Xnye2k975_s/v-deo.html Pre-orders of the chisel sets are released first to Patreon members on Patreon.com/douglaspryor. It will be first come first serve, so if you want to guarantee getting a set that's where you can do so! If we have extra sets at the end they will be available on DouglasPryor.com You can find John Williams work on: GuildWerks.com instagram...
The 35 piece Intermediate Chasing Set.
Переглядів 2,1 тис.2 роки тому
This comprehensive set has everything I require of a well rounded sculptors set of chasing punches and this is the set I will be using for all my online education programs this year. To pre-order a set early you can follow the links provided on Patreon.com/douglaspryor. If I still have some on stock after the limited release they will be listed on Douglaspryor.com All of the tools here are made...
Chasing a Rose in Steel. Part 3.
Переглядів 9182 роки тому
This video was not possible with out the incredible people on Patreon.com/douglaspryor and their generous support! I means so much to be able to put together and share these educational resources and it literally wouldn't happen with out your support! Thank you! Video break down: 0:00-0:37 - Cleaning up line work. 0:37-2:00 - Discussion on center petal overlaps. 2:00-4:11 - Developing center pe...
Chasing a Rose in Steel. Part 2
Переглядів 7812 роки тому
Here is the link to the Patreon post where we cover the chisel sizes and when I used them: www.patreon.com/posts/41063368 This video was not possible with out the incredible people on Patreon.com/douglaspryor and their generous support! I means so much to be able to put together and share these educational resources and it literally wouldn't happen with out your support! Thank you!
Chasing a Rose in Steel. Part 1 of 3
Переглядів 1,3 тис.2 роки тому
With out my patrons on Patreon this video series wouldn't have been possible. Thank you so much for all your support and I can't wait to keep making more series for you in the future! If you'd like to see more of this series and others like it visit with me over on Patreon.com/dougalspryor Roses are one of those flowers I forget about because they have been around all my life. My Mother was a c...
Forging Crocodile Teeth
Переглядів 1,4 тис.2 роки тому
The 2 week saga of forging out these teeth was an intimidating step for me. I had practiced similar shapes on a smaller scale but scaling up is always different and holds it's own surprises. In this condensed version of the video's I released on Patreon last year I show every step from the drawing to rawhide mallet hot work and oh so much planishing. I learned a lot from this step which would f...
Forging the Crocodiles Back Armor.
Переглядів 7242 роки тому
Forging these scutes out from the inside felt really stout, the steel felt thick and reliable. It felt like I was forging 14ga in about 85% of the areas I was working. Only once I got toward the edge where it meets the background did it feel a little thinner (maybe 16-18ga, still plenty to work with). Forging the volume for the crocodiles back. A scute is the keratinous sheathe of skin that cov...
Tracing and Lining Crocodile Tail Scales.
Переглядів 1,2 тис.2 роки тому
Thank you to my Patreon community for your support through this project! Without you the ambitious projects and educational content I create would look very different. Because of your support I can dive much deeper into the exploration of sculptural chasing. You all have my deepest thanks! -Douglas You can find information on my workshops or where I am demoing this year on my website: douglaspr...
Gecko on Pancakes
Переглядів 2,7 тис.3 роки тому
Thank you to my patrons on Patreon who make these video's possible! You make the difference with your support and it means the world to me! This video made for patreon on 5/8/2020 To see the full post visit : www.patreon.com/posts/36922994 This was one of my favorite projects of 2020, there were many passes and anneals to raise and chase the 5inch tall stake of pancakes. 98% of the work was don...
Shaping annealed structures.
Переглядів 2,6 тис.3 роки тому
If you liked this video I have much more on Patreon.com/douglaspryor ! More from this project, tool making video's, and in process works on my latest sculptures. I have a lot to say about the process and why it's relevant to this structure. But feel free to skip to where you would like by following the time stamps below. Also keep a look out for my online and in person workshops to be announced...
Chasing a Rose in Steel. Time Lapse at 8x speed.
Переглядів 4,7 тис.3 роки тому
Chasing a Rose in Steel. Time Lapse at 8x speed.
Brass Dwarf Final Episode 14: The Eyes
Переглядів 1,8 тис.4 роки тому
Brass Dwarf Final Episode 14: The Eyes
A little Repousse. Episode 10 of Brass Dwarf
Переглядів 5 тис.4 роки тому
A little Repousse. Episode 10 of Brass Dwarf
Eps 5 Brass Dwarf : Development of the nose and cheek bones.
Переглядів 1,3 тис.4 роки тому
Eps 5 Brass Dwarf : Development of the nose and cheek bones.
Episode 1 of Brass Dwarf series: Tracing with small curved liners
Переглядів 2,1 тис.4 роки тому
Episode 1 of Brass Dwarf series: Tracing with small curved liners
Chasing a Grizzly Buckler in 4130 Chromoly eps: 7 Sculpting the Eyes
Переглядів 1,6 тис.4 роки тому
Chasing a Grizzly Buckler in 4130 Chromoly eps: 7 Sculpting the Eyes
Super Cut of Online Class: A Blade of Grass
Переглядів 6 тис.4 роки тому
Super Cut of Online Class: A Blade of Grass
Raising an unbroken Eagle head from a single piece of 1mm copper.
Переглядів 7 тис.4 роки тому
Raising an unbroken Eagle head from a single piece of 1mm copper.
The Notes: Raising Strategy from :Intro to Raising part 1-3
Переглядів 2,4 тис.4 роки тому
The Notes: Raising Strategy from :Intro to Raising part 1-3
Raptor Vessel eps: Final Pass! teaser
Переглядів 8415 років тому
Raptor Vessel eps: Final Pass! teaser
Great artist! Great sculptor! Thaks for sharing!
this is so soothing just to keep on for background noise TBH
Hey bud, I love your channel and videos, very good content, very informative , so thank YOU! also I'm kinda wondering, what are you using to curl your moustache and keep it so well? been considering curling mine for a while now lol
You are the Michelangelo of Steel! Great artist!
Great sculptor!
Uma obra prima! Parabéns!
Excelente artista! Grande professor! Obrigado.
You are Awesome!
Very nice detail on the piece. Makes me want to give it a go. Thanks for sharing.
Looking good as always Sir!!
Wow incredible work !
No annoying jumpcuts, no music droning over everything, just heat, beat, and more work! I love it!
Вау 😱
I have done this with copper, but STEEL? How the fuck! 😮
Absolutely stunning metal art work and repousee!! Nice job!! What is the grey material you used to be formed into the back of art for support?? A type of machinists wax? I'm not familiar with the total process with steel. . Many years ago my mother did this using copper and she backed her work with a type of fairly rigid clay. I did some of this type of art in school in both Copper and Aluminum. We used clay too. Keeping the metal annealed properly was the key to success! Ohterwise metal failure and fatigue was a problem. A lot of fun, requiring a lot of patience!!
Another level.
Unbelievable!
You make it look easy, very nice
I need 50 of them! lol!
magnificent
Wow...........Incredible talent. Was that a face of Sir Francis Bacon?
Hermoso trabajo
That hammer's coming down pretty close to your thumb. 🩹🤕
Wow. What an artist. I'm amazed by your talent. Thanks so very much for sharing you talent with the world. Amazing. You got a sub from me.
Perfect Dark Souls helmet I call it.. Colonizing colon
Always a joy to see true craftsmen at work 👍
Just unbelievable how the flat piece of metal turned into a masterpiece before your eyes.
A master piece
Dr robotnik
That would be an incredible visor for a steel helmet
Super!!!!!
Thank you for sharing your amazing videos
👍👍👍👍👍👍
I (!) Steel Face Douglas!
Stunning work
Phantastisch!! 👍👍👍
Just splendid craftsmanship and skill what an artist.
👍👍👍👍👍👍
Hi from Russia!!! Your work is amazing! How long time did you spend on this face??? By the way, did you try Brass or something more elastic, flexible than steel????
Сразу ставлю палец вверх. Прям космос❤❤❤
in 8th grade took metal working class in Jr. High. was to make a simple bowl. for the life of me I could never get it smooth without the hammer strikes. Great job there
I hope you havent got neighbours
Wow, you’re good at that! Just curious, how many times have you hit your thumb?
Never
What a masterpiece! mesmerizing work, thank you for sharing this!
Merci pour ce cours sur fer... Quels beaux outils ! C'est quoi cette résine ? Pour des visages sur plaque de cuivre, je chauffe du plomb étain , mais oui , serai curieux de connaître la nature de votre résine.... Merci beaucoup
Love your work!
Just came across your channel. Great work and content. Honest suggestions in my opinion would be to cut up the video into parts as the work is great and I think it would build anticipation to see final product. I would also flip your camera to landscape mode as well. Just suggestions and wish you great success in the growth of your channel and your work.
isn't this already in landscape mode? sorry just confused.
Remarkable work!
Beautiful work thanks for sharing it